The Australian Standards had to take action and develop a standard because of the enormous termite problem in Sydney. As a direct result of this measure, an experienced inspector has to make a thorough inspection as a component part of the remedy for Termite Control Sydney.
Feeding on available wood and living in large underground colonies, termites can easily enter nearby buildings. The known methods are by tunneling through wood, or gaining entry via self-built mud leads over or through cracks in foundation walls. Failure to attend to the problem can mean serious structural repairwork will be required.
The best place to begin an inspection is on the outside, being sure to scrutinize all the ground that is close by as well. All dead trees, stumps, structural timbers and foundation walls must be thoroughly examined for signs of infestation, while any loose wood lying about should also be checked.
Once that is complete, it is time to go indoors and do the interior. The inspector looks for similar signs of infestation such as wood damage. While this is symptomatic of old damage, evidence of new activity can be concluded if there are mud leads or actual termites.
Man-made materials such as soft plastic, cables and plaster may also be penetrated, although they will not be eaten. However, such damage is an important sign.
Visual inspection is the most common detection method employed, but termites are not always in view. They are secretive pests and are attracted to areas which are not visible and difficult to access.
While the visual inspection may be the most common method of detection, there may be a need for an invasive inspection as well. This is very drastic as it involves the dismantling and removal of parts of the building. Because of this, it should only be attempted by fully trained professionals.
Recent developments have seen the introduction of thermal imaging for termite detection. This can be used to replace the more drastic invasive technique as it can detect pest activity in the building's fabric through temperature differences. It can pinpoint areas of activity without the need to dismantle a wall, and therefore minimizes disruption.
It is possible for a person to take reasonable precautions to prevent the problem reaching the point where a cure is needed. Any termite food resources touching the ground, should be lifted away, and it is preferable for any building wood structures to be put on a concrete base. Should there be any outbuildings, the same measure is recommended.
Finally, look around the outside space and remove all loose wood and tree branches. Also, get rid of any dead trees or old stumps as these are rich food sources for termites.
Feeding on available wood and living in large underground colonies, termites can easily enter nearby buildings. The known methods are by tunneling through wood, or gaining entry via self-built mud leads over or through cracks in foundation walls. Failure to attend to the problem can mean serious structural repairwork will be required.
The best place to begin an inspection is on the outside, being sure to scrutinize all the ground that is close by as well. All dead trees, stumps, structural timbers and foundation walls must be thoroughly examined for signs of infestation, while any loose wood lying about should also be checked.
Once that is complete, it is time to go indoors and do the interior. The inspector looks for similar signs of infestation such as wood damage. While this is symptomatic of old damage, evidence of new activity can be concluded if there are mud leads or actual termites.
Man-made materials such as soft plastic, cables and plaster may also be penetrated, although they will not be eaten. However, such damage is an important sign.
Visual inspection is the most common detection method employed, but termites are not always in view. They are secretive pests and are attracted to areas which are not visible and difficult to access.
While the visual inspection may be the most common method of detection, there may be a need for an invasive inspection as well. This is very drastic as it involves the dismantling and removal of parts of the building. Because of this, it should only be attempted by fully trained professionals.
Recent developments have seen the introduction of thermal imaging for termite detection. This can be used to replace the more drastic invasive technique as it can detect pest activity in the building's fabric through temperature differences. It can pinpoint areas of activity without the need to dismantle a wall, and therefore minimizes disruption.
It is possible for a person to take reasonable precautions to prevent the problem reaching the point where a cure is needed. Any termite food resources touching the ground, should be lifted away, and it is preferable for any building wood structures to be put on a concrete base. Should there be any outbuildings, the same measure is recommended.
Finally, look around the outside space and remove all loose wood and tree branches. Also, get rid of any dead trees or old stumps as these are rich food sources for termites.
About the Author:
Looking to find the best deal on Termite Control Sydney, then visit www.bugz.com to find the best advice onTermite Control Sydneyfor you.
